Categories

Additional Information

Site Information

 Loading... Please wait...
  • Image 1

JCDR JCD 50W 120V MR16 (G5.3 Base) Bulb MR16EXN/G5.3

$7.95 $2.50
(You save $5.45)
SKU:
LSE1179 7559
Availability:
In Stock ready to Ship!
Shipping:
Calculated at checkout
Quantity:

Product Description

Halogen MR16 bulbs come in 120V AC with G5.3 Base (5.3mm distance between pins)
Used in: ambient lighting, general lighting,  task lighting, accent lighting
walkways, living room, dinning room, bedroom, laundry, ceiling fixtures, recessed or track lights, outdoor landscaping.
Energy Used: 50W
Volts: 120V
Type: MR16
Cover: Glass Lens
Base: G5.3 same as GX5.3 (5.3mm space distance between pins)
CRI: 82
Length: 1 7/8"
Diameter: 2"
Light Output: 1,700
Average Lifetime: 3,000 hours
Color: 3000K
Beam Angle: Flood (36Degrees)
Filament: CC-8

Used in: ambient lighting, general lighting,  task lighting, accent lighting
walkways, living room, dinning room, bedroom, laundry, ceiling fixtures, recessed or track lights, outdoor landscaping.

Halogen MR16 bulbs come in 120V AC with G5.3 wide pin spacing
The main advantage of using Line Voltage (120V) MR16 bulbs is that housings are far less expensive because there is no need for a transformer.  Also, dimmers and other control equipment are less expensive for these type of lamps.  Standard incandescent dimmers can be used with these bulbs which you can eaisly find at local home depot or lowes. The 120V type MR16 bulbs use an aluminized reflector and therefore produce great amount of lighting.  They are very great lamps and produce substantial amount of light in any part of your home.

The light source of MR type bulbs is a single-ended quartz halogen filament capsule. The reflective coating of MR16 lamps can be either dichroic or aluminum. A dichroic coating is thin, multi-layer dielectric (non-metallic film) that allows infrared radiation (heat) from the filament capsule to pass through the reflector while it reflects visible radiation light forward. An aluminum coating is a thin film of aluminum that, unlike the dichroic coating, it reflects infrared & visible radiation. There are MR16 bulbs that have a cover glass on the front end of the reflector. This cover is a safety measure designed to contain any broken fragments in case the lamp shatters when it fails.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category